3/8" cul-de-sac préformé galvanisé de fil d'acier
Prix: US$ 0.4-5 per piece
MOQ: 100 pieces
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:5/8" guy wire preformed grips, ADSS Strand guy wire grips, 5/8" Steel Strand preformed grips
Guy grip dead end Guy grip dead end is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The product grips the strand ... Voir plus
➤ Visiter Site Internet
ISO9001 Armor Rods Electrical 25mm2 a préformé Guy Grip
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:25mm2 preformed guy grip, ISO9001 preformed wire rope, Armor Rods 25mm2 deadend
Preformed dead end for conductor Preformed dead end for conductor is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is designed for conductor installation in transmission and distribution lines.The conductor includes ACSR,AAAC,plastic jacketed conductor.The produc... Voir plus
➤ Visiter Site Internet
100m Span ADSS Suspension Clamp GB Sandard
Prix: US$ 3-30 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:100m Span ADSS Suspension Clamp, GB ADSS Suspension Clamp
Preformed Suspension clamp for ADSS short span Preformed Suspension clamp for ADSS short span is intended for use on ADSS short span 100m 200m.The product is designed as a clamp with cushion insert and clamping and locking structure.The clamp grips ADSS cable gently through the cushion insert to avo... Voir plus
➤ Visiter Site Internet
Au-dessus 1/4" 6,30 millimètres ont préformé la bride de montage de câble de cul-de-sac
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:Overhead 1/4" Preformed Dead End, 6.30 mm Preformed Dead End, Preformed cable Fitting Clamp
Preformed dead end for strand Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The p... Voir plus
➤ Visiter Site Internet
La tension de Midium a galvanisé les poignées en acier de cul-de-sac de 20KN 200m
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:200m dead end grips, Medium tension 20KN dead end, 20KN dead end grips
Midium tension dead end for ADSS Midium tension dead end for ADSS is made of aluminum-clad steel wire or galvanized steel wire,It is designed as two layers structure consisting of structural reinforcing rods and dead end component to terminate All Dielectric Self-Supporting aerial fiber optic cable ... Voir plus
➤ Visiter Site Internet
Orange en acier galvanisée 3/8" poignée de cul-de-sac préformée par 9.53mm
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:9.53mm preformed dead end grip, Galvanized steel 3/8" dead end grip, Galvanized 9.53mm preformed dead end
Guy grip dead end Guy grip dead end is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The product grips the strand ... Voir plus
➤ Visiter Site Internet
Acier galvanisé 7/16" conducteur Preformed Dead End d'OEM
Prix: US$ 0.3-5 per set
MOQ: 100 sets
Heure de livraison: 10-25days
Marque: HLLP
Souligner:OEM Preformed Dead End, conductor Preformed Dead End, Galvanized 7/16" conductor Dead End
What is preformed rod? Preformed rod is made of high strenth wire.The usual materials are galvanized steel wire,aluminum-clad steel wire,aluminum-alloy wire. The high strenth wire through a moid molding,made of a certain length of a screw,like ordinary spring,The screw pitch is the pressure spring d... Voir plus
➤ Visiter Site Internet
Bride préformée de suspension de l'alliage d'aluminium OPGW
Prix: US$ 3-30 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:preformed OPGW Suspension Clamp, aluminum opgw suspension clamp, 8mm OPGW Suspension Clamp
OPGW Suspension clamp OPGW Suspension clamp is intended for use on OPGW.The product is designed as a combination of two layer of preformed rods to reduce the static and dynamic stresses at the support point,the fatigue resistance of OPGW is greatly improved.Double support suspension products are ava... Voir plus
➤ Visiter Site Internet
Le brin DN4108 en acier plaqué en aluminium a préformé Guy Grip
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:strand preformed guy grip, DN4108 preformed guy grip, Aluminum Clad Steel Preformed Guy Grip
Preformed dead end for aluminum clad steel strand Preformed dead end for aluminum steel strand is made of the same basic material as the strand to which it is applied.Common material is aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constractio... Voir plus
➤ Visiter Site Internet
Cul-de-sac préformé en acier galvanisé 7/16 11.11mm adapté aux besoins du client
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:7/16" Preformed Dead End, 11.11mm Preformed Dead End, Galvanized steel Preformed Dead End
Galvanized Steel Preformed Dead End 7/16 11.11mm Customized Description Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole assoc... Voir plus
➤ Visiter Site Internet
Code couleurs de Polonais de terminal ACSR 9/16" poignées préformées
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:9/16" preformed grips, Color Code ACSR grips, Terminal poles ACSR preformed grips
Preformed dead end for conductor Preformed dead end for conductor is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is designed for conductor installation in transmission and distribution lines.The conductor includes ACSR,AAAC,plastic jacketed conductor.The produc... Voir plus
➤ Visiter Site Internet
ANJ 0950 le gigaoctet ADSS droit standard a préformé le cul-de-sac
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:ADSS Preformed Dead End, ANJ 0950 ADSS Dead End, GB standard Preformed Dead End
Limited tension dead end for ADSS Limited tension dead end for ADSS is made of aluminum-clad steel wire or galvanized steel wire,It is designed as single layer dead end structure to terminate All Dielectric Self-Supporting aerial fiber optic cable (ADSS),and is intended for relatively low tension ap... Voir plus
➤ Visiter Site Internet
Main gauche préformée EHS 4.7mm 3/16 Guy Grip Dead End
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:4.7mm guy grip dead end, Left hand EHS dead end, 3/16 guy grip dead end
Preformed dead end for strand Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The p... Voir plus
➤ Visiter Site Internet
Tension élevée ADSS 3/16" bride préformée de cul-de-sac
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:3/16" Preformed Dead End Clamp, ads preformed dead end clamp, preformed dead end tension clamp
Preformed dead end for strand Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The p... Voir plus
➤ Visiter Site Internet
Les garnitures de puissance 5/16" ont préformé le fil de séjour de Guy Grip Dead End For
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:5/16" Preformed guy grip dead end, 5/16" preformed dead end For Stay Wire, Power Fittings preformed dead end
Guy grip dead end Guy grip dead end is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The product grips the strand ... Voir plus
➤ Visiter Site Internet
Ensemble préformé hélicoïdal de suspension de cable électrique de 22.10mm
Prix: US$ 3-30 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:22.10mm cable Preformed Suspension Set, Helical Preformed Suspension Set, Helical 22.10mm Preformed Suspension Set
Preformed Suspension set for conductor Preformed Suspension set for conductor is intended for use on all aluminum based conductors installation in power transmission lines.The product is designed as a complex of components to reduce the static and dynamic stresses at the support point,the fatigue re... Voir plus
➤ Visiter Site Internet
Bride préformée de suspension de 300M ADSS
Prix: US$ 3-30 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:bride de suspension de 300M ADSS, bride de suspension de câble de 300M Fiber Optic, Bride préformée de suspension d'ADSS
Preformed Suspension clamp for ADSS long span Preformed Suspension clamp for ADSS long span is intended for use on ADSS cable relative long span (more than 300m span).The product is designed as a combination of two layer of preformed rods to reduce the static and dynamic stresses at the support poin... Voir plus
➤ Visiter Site Internet
cul-de-sac préformé par 1800mm
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:cul-de-sac préformé par 1800mm, cul-de-sac de brin de 1800mm, cul-de-sac de poignée de type de 1800mm
Preformed dead end for strand Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to design for use on single pole associated with distribution constraction.The p... Voir plus
➤ Visiter Site Internet
DN1120 4.78mm tension de 5 Rods a préformé Guy Grip Dead End
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:DN1120 Guy Tension Dead end, 4.78mm guy grip dead end, DN1120 Tension grip dead end
Preformed dead end for conductor Preformed dead end for conductor is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is designed for conductor installation in transmission and distribution lines.The conductor includes ACSR,AAAC,plastic jacketed conductor.The produc... Voir plus
➤ Visiter Site Internet
HLLP Heliformed ACSR 50mm2 3/8" cul-de-sac préformé
Prix: US$ 0.4-5 per set
MOQ: 100 sets
Heure de livraison: 10-20 days
Marque: HLLP
Souligner:3/8" Preformed Dead End, Heliformed Preformed Dead End, ACSR 50mm2 Dead End
Preformed dead end for conductor Preformed dead end for conductor is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is designed for conductor installation in transmission and distribution lines.The conductor includes ACSR,AAAC,plastic jacketed conductor.The produc... Voir plus
➤ Visiter Site Internet