Goupilles et douilles d'éjecteur
(25)
L'éjecteur de l'acier inoxydable DIN16756 borne 1,2344 douilles d'éjecteur de nitrure de Tubulaire
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:DIN16756 Stainless Steel Ejector Pins, Stainless Steel Ejector Pins 1.2344
PRODUCT DESCRIPTION DIN16756 sleeves Ejector Pin Molds Ejectors tubulaire Nitride Ejector sleeves Standard: DIN16756, customized Material: FDAC, 1.2344, SKD61 Surface Treatment: TiCN, TiN, Aitain, Ticrn, nitriding , Black oxygened, Black coating etc available. Our Main Products Plastic injection mol... Voir plus
➤ Visiter Site Internet
Pin plat DIN1530FH DIN1530F DIN1530 F-B Injection Molding Pins d'éjecteur de lame
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Blade Ejector Pin DIN1530FH, Blade Ejector Pin DIN1530F, DIN1530F-B Injection Molding Pins
PRODUCT DESCRIPTION Flat Ejector Pin Ejector Blades For Plastic Mold Components DIIN1530FH, DIIN1530F DIN1530F-B Standard: DIIN1530F, DIIN1530FH, DIN1530F-B, HASCO,MISUMI, PUNCH, AMERICAN INCH Material:H13 (Hardened) /M2/SKD61/SKH51/SKD11/ 1.2344, High Speed Steel etc. Treatment:Through Hardened, Ti... Voir plus
➤ Visiter Site Internet
Goupilles et douilles de noyau de Pin TiCN d'éjecteur de moulage par injection de SKH40 SKH51
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:SKH40 Injection Mold Ejector Pin, SKH51 Injection Mold Ejector Pin, TiCN Core Pins And Sleeves
PRODUCT DESCRIPTION Plastic Injection Mold Ejector Pin and Ejector Sleeve Standard:Standard and non standard Material: SKD61,SKH51 ,SKD11 ,SKH40, FDAC Treatment: TiN, TiCN,Nitriding, PVD coating Product Name Plastic Injection Mold Ejector Pin and Ejector Sleeve Materials FDAC,SKD61,SKH51 Certificati... Voir plus
➤ Visiter Site Internet
Goupilles et douilles droites DIN1530-C DIN1530-CH de l'éjecteur ISO8694
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Ejector Pins And Sleeves DIN1530-C, ISO8694 Ejector Pins And Sleeves, Straight Ejector Pins
PRODUCT DESCRIPTION Product Name DIN1530C DIIN1530CH Plastic Injection Mold Shoulder Ejector Pin Die Mold Product Specification DIN1530CH WS 1.2210 HRC 58-62 DIN 1530C WAS 1.2344 >=HV 950 HRC 40-45 DIN 1530C-B WAS 1.2344 >=HV 950 HRC 40-45 Surface treatment Vacum Nitride, Polishing Heat treatm... Voir plus
➤ Visiter Site Internet
L'éjecteur principal conique de moule gaine DIN D 1530 par durci
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Conical Head Mold Ejector Sleeves, DIN 1530 Mold Ejector Sleeves, HSS sleeve ejector pin
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are an essential component of injection molding machines, used to eject the molded product from the mold cavity. They are typically made of high-strength materials such as hardened steel or tungsten car... Voir plus
➤ Visiter Site Internet
L'éjecteur principal conique goupille et gaine le moule de goupille de douille DIN 1530
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Conical Head Ejector Pins And Sleeves, Hardened Ejector Pins And Sleeves, DIN 1530 Sleeve Pin
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are available in a variety of sizes and shapes, depending on the specific requirements of the injection molding application. They can be straight or angled, and can have a range of diameters and lengths... Voir plus
➤ Visiter Site Internet
Les goupilles d'éjecteur DIN 1530 EDM et gaine D par durci
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:HASCO Ejector Pins And Sleeves, EDM Ejector Pins And Sleeves, dme ejector sleeves
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves can be customized to meet the specific needs of an injection molding application. This can include features such as specialized coatings to improve wear resistance, or special geometry to accommodate un... Voir plus
➤ Visiter Site Internet
L'éjecteur principal conique goupille et gaine le mur mince
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Conical Head Ejector Pins And Sleeves, Conical Head Ejector Pins And Sleeves, thin wall ejector sleeves
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves can be used in both single-cavity and multicavity molds. In multicavity molds, multiple ejector sleeves are typically used to eject each part from the mold cavity. Our Main Products Plastic injection mo... Voir plus
➤ Visiter Site Internet
L'éjecteur principal conique de moule de nitruration gaine le moule de goupille de douille DIN 1530
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Nitriding Mold Ejector Sleeves, FIBRO Mold Ejector Sleeves, EDM Sleeve Pin Mold
Conical Head Mold Ejector Sleeves DIN 1530 D Through Hardened PRODUCT DESCRIPTION Ejector sleeves are typically installed into the mold using a variety of methods, including press-fit, threaded, or tapered fit. The specific installation method used will depend on the size and shape of the ejector sl... Voir plus
➤ Visiter Site Internet
Goupilles et douilles SKH51, éjecteur principal droit Pin Sleeve d'éjecteur de MISUMI
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:MISUMI Ejector Pins And Sleeves, Ejector Pins And Sleeves SKH51, Straight Head Ejector Pin Sleeve
PRODUCT DESCRIPTION Straight head ejector pin Misumi Injection Mould DME Ejector Pins for Hasco Ejector Pin Sleeve Standard: Dayton/Lane/DIN/ISO/MISUMI/EDM/FIBRO//HASCO Material: SKD61 Skh51 etc Treatment: Nitriding, chemical black, bright etc. The ejector pin is a plastic mold accessory used in pla... Voir plus
➤ Visiter Site Internet
L'éjecteur mince du mur DIN16756 gaine le moulage par injection 1,2067 ASTM SKH51
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:DIN16756 Thin Wall Ejector Sleeves, Thin Wall Ejector Sleeves 1.2067, Sleeve Ejector Injection Moulding ASTM
PRODUCT DESCRIPTION Ejector sleeves DIN16756 Sleeves plastic injection mold component Standard: DIN16756, MISUMI, ASTM, JIS, customized Material:SKD61/SKH51/SKD11,1.2344, 1.2067 FDAC Treatment: Nitriding,TiN,TiCN, etc ORDER FLOW CHAT: Customer inquiries → Provide Spec./CAD/3D drawing → Engineer chec... Voir plus
➤ Visiter Site Internet
OIN 6751, Hasco des goupilles 1530 et des douilles d'éjecteur DIN A a fait un pas Pin d'éjecteur
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Ejector Pins And Sleeves DIN 1530 A, Ejector Pins And Sleeves ISO 6751, Hasco Stepped Ejector Pin
PRODUCT DESCRIPTION DIN1530-A / ISO6751 Straight head ejector pin Standard: DIN, JIS, MISUMI, American Inch, customized, non standard Material: 1.2344 Hot Work Die Steel/WS 1.2210 /H-13 Hot Work Die Steel//SKH51/SKD11/65mn etc. Treatment: Nitriding, TiCNchemical black, bright Nitrided etc. SKH51 thi... Voir plus
➤ Visiter Site Internet
L'éjecteur de place de DIN1530C DIN1530CH goupille le moule, télémètre radar d'épaule meurent des goupilles d'éjecteur
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:DIN1530C Square Ejector Pins, DIN1530CH Square Ejector Pins, DME Die Ejector Pins
PRODUCT DESCRIPTION DIN1530C DIIN1530CH Plastic Injection Mold Shoulder Ejector Pin Die Mold Standard: DME, HASCO,MISUMI, PUNCH, Customised Material: SKD61/SKH51/SKD11/ 1.2344, 65mn etc. Treatment: Nitriding, chemichal blacking, TiN, TiCN ALCRN PVD DLC Product Name DIN1530C DIIN1530CH Plastic Inject... Voir plus
➤ Visiter Site Internet
Le travail chaud de Pin DIN16756 ISO8405 1,2344 de goupilles et de douilles d'éjecteur de H13 SUJ2 SKD61 meurent acier
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:H13 Ejector Pins And Sleeves, SUJ2 Ejector Pins And Sleeves, DIN16756 Ejector Sleeve Pin
PRODUCT DESCRIPTION H13 SUJ2 SKD61 Through Hardened Ejector Sleeves DIN16756 / ISO8405 1.2344 Hot Work Die Steel Standard: DIN16756 / ISO8405 DME/MISUMI/HASCO Material:H13 SUJ2 SKD61, FDAC,1.2344 etc. Our main products Guide Pins,Stripper Guide Pin,Holder Guide Post Sets,Ejector Pins and Sleeve,Stri... Voir plus
➤ Visiter Site Internet
1,2842 goupilles et éjecteur industriels de la lame Punches1.2210 pour le moulage par injection en plastique
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:1.2842 Industrial Pins And Punches, Industrial Pins And Punches 1.2210
PRODUCT DESCRIPTION Flat Ejector Pin, Blade Ejector Blades for Plastic Injection Mold DIIN1530FH, DIIN1530F DIN1530F-B Standard: DIIN1530, JIS, DIN, HASCO,MISUMI, PUNCH, AMERICAN INCH Material:H13 /M2/SKD61/SKH51/SKD11/ 1.2344/ 1.2210Through Hardened, Nitriding, Head Tempered, Blackened, Treatment:T... Voir plus
➤ Visiter Site Internet
L'éjecteur plat de nitruration goupille et gaine la norme de 1,2344 DIN1530CH/C
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Ejector Pins And Sleeves 1.2344, Ejector Pins And Sleeves DIN1530CH/C, Nitriding Flat Ejector Pin
PRODUCT DESCRIPTION Manufacturer Dongguan Datong Mold Fittings Co., Ltd Product Name Shoulder Ejector Pin, stepped ejector pin Materials SKD61/SKH51/SKD11 Hardness HRC48-50,HRC58-60 Tolerance ±0.002mm or according to the requirements Delivery time Trial order: 3-5 days, mass production: 7-15 days. P... Voir plus
➤ Visiter Site Internet
L'éjecteur adapté aux besoins du client de HRC 58 goupille le Pin d'insertion de m2 1,2344 de moulage par injection
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:HRC 58 Ejector Pins Injection Molding, Ejector Pins Injection Molding M2, 1.2344 Insert Pin
PRODUCT DESCRIPTION Customised Ejector pin, Insert pin, Core Pin, Shoulder Pin Mold ejection system mold ejector pin Standard: Non standard/ Customised/DIN/JIS/ ISO6751 DIN, JIS, MISUMI, PUNCH/ RABOUDINAmerican Inch, Material: WS 1.2210/WAS 1.2344 /H-13 /M2/SKH51/SKD11/ SKS3/ EN31 Treatment: TTiCN, ... Voir plus
➤ Visiter Site Internet
SKD11 H13 a fait un pas des goupilles d'éjecteur et gaine pouce H13 américain standard de JIS
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:SKD11 Ejector Pins And Sleeves, Ejector Pins And Sleeves JIS, H13 Stepped Ejector Sleeves
PRODUCT DESCRIPTION Shouldered Ejector Sleeves JIS Standard H13 American Inch Stepped Ejector Sleeves MISUMI Standard: JIS/DIN16756 / ISO8405 DME/MISUMI/HASCO/ American Inch Material: SKD61/SKH51/SKD11/ 1.2067 WAS 1.2344 FDAC Treatment: Bright Nitrided, TiN, TiCN ALCRN PVD DLC Product Name Shouldere... Voir plus
➤ Visiter Site Internet
L'éjecteur de moule de noir DIN 1530A B goupille et gaine DIN 1530 OH DIN A 1530
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:Ejector Pins And Sleeves DIN 1530 AH, Ejector Pins And Sleeves DIN 1530 A, Black Mould Ejector Pins
PRODUCT DESCRIPTION Product Name DIN1530AH/ DIN1530A/ DIN1530A-B Black Straight head ejector pin Product Specification DIN1530AH WS 1.2210 HRC58-62 DIN 1530A WAS 1.2344 Surface hardness>=HV 950 Core HRC 40-45 DIN 1530A-B WAS 1.2344 Surface hardness >=HV 950 HRC 40-45, Black Surface treatment V... Voir plus
➤ Visiter Site Internet
Pin droit d'éjecteur du télémètre radar MISUMI JIS de TiN Treatment HASCO de composants de moulage par injection de FDAC
Prix: 0.2-2 usd/pc
MOQ: MOQ: 10 pcs
Heure de livraison: 5-8 days
Marque: DATONG
Souligner:FDAC Injection Molding Components, TiN FDAC Injection Molding Components, HASCO FDAC Injection Molding Components
PRODUCT DESCRIPTION Mold Parts Mold Components HASCO DME MISUMI JIS Straight Ejector Pin Ejector Sleeve Standard:PUNCH/MISUMI/Customized Material: FDAC,SKD61,SKH51 etc. Treatment: Vacuum Nitriding, Chemical black, TiCN, DLC.TiN, TiCN,Nitriding, Product Name Ejector pin/Straight/Shoulder/Core pins/Ej... Voir plus
➤ Visiter Site Internet