Mesure de chapeau de lampe
(32)
Mesure de chapeau de lampe de mètre de couple de Digital avec des mesures/brides de couple d'E27/E26 G5/G13
Prix: USD800-USD1000/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO GROUP
Souligner:go no go gauge, cap torque tester
Digital Torque Meter 1. Introduction Digital Torque meter is designed to test the mechanical strength of lamp cap according to IEC60598-1. The clamps fix the lampcap, and rotate the lamp to test postive and negative toruqe of the lampcap, the test range is from 0 to 10N.m. The digital torque meter e... Voir plus
➤ Visiter Site Internet
La lampe à haute densité disparaissent aucun vont mesure de Pin s'appliquent aux bases de essai 7006-121-1
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60061 - 3 GU10 Lamp Cap Gauge Go Not Go Gauge for bases 7006-121-1 GU10 “Go” and “Not Go” Gauge for bases 7006-121-1 Purpose: To check the base GU10 in the following respects: - the diameter of the individual pins (dimension A); - the combined displacement and diameter of the pins (dimensions A a... Voir plus
➤ Visiter Site Internet
Mesure de chapeau du lampadaire IEC60061-3, mesure 7006-50 7006-51A du contact E27
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60061-3 Lamp Cap Gauge E27 Protection Gauges Contact Gauge 7006-50 7006-51A Gauge for Finished Lamp fitted with E27 Caps for Testing Contact Making (7006-50-1) Purpose: to check lamp dimensions for contact making in IEC holders. Testing: the shape of the lamp with regard to the fit in the lamphol... Voir plus
➤ Visiter Site Internet
Mesure de chapeau de lampe de haute précision 7006-27B 7006-28A avec le certificat d'essai d'étalonnage
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, go gauge no go gauge
IEC60061-3 Lamp Cap Gauge E27 Go Gauge No Go Gauge 7006-27B 7006-28A 7006-27C Go Gauge for E27 Caps on Finished Lamps (7006-27B-1) Purpose: to check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps shown on sheet 7004-21. Testing: When the cap on a finish... Voir plus
➤ Visiter Site Internet
Certification matérielle en acier spéciale de calibrage de laboratoire de mesure de chapeau de la lampe IEC60061-2
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, go gauge no go gauge
Gauge for Lamp Caps and Bases According to IEC60061-3 with Third-Lab Calibration Certificate List of Gauge for Lamp Cap and Base: Figure Number Description E27 Lamp Cap Gauge 7006-27B-1 “Go” gauge for E27 caps on finished lamps 7006-27C-1 “Go” gauge for dimension “S1” of E27 caps on finished lamps 7... Voir plus
➤ Visiter Site Internet
IEC60061-3 inoxydables vont ne pas aller des mesures pour les douilles de lampe et les chapeaux de lampe G5/G13/2G11 avec le certificat de CNAS
Prix: USD200~USD800
MOQ: 1 piece
Heure de livraison: 30 working days
Marque: PEGO GROUP
Souligner:go no go gauge, cap torque tester
IEC60061-3 Rustless Go Not Go Gauges for Lampholders and Lamp Caps G5 / G13 / 2G11 with CNAS Certificate Model Description Figure number G5 "Go"and "Not Go" gauge for unmounted bi-pin cap (Not for use on finished lamps) G5 7006-46-3 "Go" gauge for bi-pin cap on finished... Voir plus
➤ Visiter Site Internet
Mètre standard de couple du CEI/gigaoctet Digital, essai de force mécanique pour des chapeaux de lampe
Prix: USD800-USD1000/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, go gauge no go gauge
Digital Torque Meter for Lamp Caps E27 / E40 / E26 / G5 / G13 with Range of 0 to 10N.m Introduction Torque test is a mechanical strength safety requirement of the lamp cap, and apply to the test of HID and CFL. The design of PG338 digital torque meter refers to IEC and GB standards, and meet the tes... Voir plus
➤ Visiter Site Internet
Appareillage standard E14 E27 E40 de pression de support de lampe en métal IEC60238
Prix: USD1000~USD3000piece
MOQ: 1 piece
Heure de livraison: 30 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
IEC60238 Figure 9 Metal Lampholders E14 E27 E40 Pressure Apparatus 1. Introduction The lamphoders e14, E27 and E40 pressure apparatus are designed accoding to IEC(BS EN)60238 clause 15.7 and figure 9, it is applied to test the mechanical strength of external metal parts (out shell and dome) of metal... Voir plus
➤ Visiter Site Internet
Mesure de finition 7006 -10/7006 - 11/7006 - 4A de chapeau de lampe 12 mois de garantie
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60061 - 3 Gauges for Lamp Cap B22 Lamp Cap Gauge 7006 -10, 7006 - 11, 7006 - 4A “Not Go” Gauge for B22 Caps on Finished Lamps (7006-10-8) Purpose: to check dimension A min. of caps B22 on finished lamps. Testing: caps on finished lamps shall be assured to be correct if the gauge does not pass ove... Voir plus
➤ Visiter Site Internet
B15 / L'appareil de contrôle de couple de mesure de chapeau de la lampe B22 appliquent à l'outil de mesure de couple
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60560-2 B15 and B22 Holder Torque Gauge for Torsion Resistance Testing 1. Introduction Meet the requirements of IEC60432-1 figure C.1 and IEC60560-2 figure 4. 2. Specification: Dimension B15 (mm) B22 (mm) Tolerance (mm) A 15.27 22.27 +0.03 B 19.0 19.0 Min. C 21.0 28.0 Min. D 9.5 9.5 Min. E 3.0 3.... Voir plus
➤ Visiter Site Internet
Acier spécial de mesure de couple du support IEC60432-1 pour l'essai de résistance de torsion
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
IEC60432-1 E12 / E14 / E17 / E26 / E27 Holder Torque Gauge for Torsion Resistance Testing 1. Introduction Meet the requirements of IEC60432-1 figure C.2 and IEC60560-2 figure 3. 2. Specification: Dimension E12 E14 E17 E26 and E26d E27 Tolerance C 15.27 20.0 20.0 32.0 32.0 Min. K 9.0 11.5 10.0 11.0 1... Voir plus
➤ Visiter Site Internet
Le chapeau noir de la lampe 7006-27F/7006-28B disparaissent aucun vont matériel d'acier allié de mesure
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
7006-27F / 7006-28B Go No Go Gauge for E17 Lamp Cap Gague Conforms to IEC60061-3 Introduction: E14 lamp cap and lampholder gauges are designed according to IEC60061-3:2004, they are applied to quality test of E14 cap. The structure and waveform are calculated by PC to reach high precision, and the a... Voir plus
➤ Visiter Site Internet
Essai de mesure de chapeau de lampe de haute précision établissant le contact mesurer E40/E27
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
IEC60238 Test Caps for Lampholders E14 / E40 / E27 with Third-Lab Calibration Certificate List of Lampholder Gauges: Figure number Description E14 BS EN60238 Figure 5 Test caps for lampholders E14 BS EN60238 Figure 11 Test Caps for Lampholders E14 BS EN60238 Figure 13 test cap A and Test cap B for L... Voir plus
➤ Visiter Site Internet
Le support de lampe disparaissent et aucun disparaissent la mesure, norme de l'appareil de contrôle IEC60061-3 de couple de chapeau
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
Go and Not Go Gauge for Lampholder E40 7006-25 7006-26 According to IEC60061-3 Go Gauge for screw threads of lampholder (7006-25-7) Purpose: To check the minimum dimensions of the lampholder screw thread and dimension X shown on sheet 7005-20. Testing: It shall be possible to screw the gauge into th... Voir plus
➤ Visiter Site Internet
Mesure de chapeau de lampe de la prise E40 contre le contact 7006-23/7006-24 d'accidents
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, go gauge no go gauge
Protection Gauge and Plug Gauge for Lampholder E40 Against Accident Contact 7006-23 7006-24 Gauge for protecting against Bulb-neck damage and for testing contact-making in lampholder (7006-23-3) Purpose: To check: a. Protection against bulb-neck damage by the rim of the E40 lampholder. b. Contact-ma... Voir plus
➤ Visiter Site Internet
Les douilles de lampe IEC60238-2011 examinent le matériel d'acier inoxydable d'appareil E14/E27/E40
Prix: USD1000~USD3000piece
MOQ: 1 piece
Heure de livraison: 30 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
BS EN60238 Figure 14 E14 E27 E40 Lampholders Normal Operation Test Apparatus 1. Introduction The Normal Operation test Apparatus is designed according to BS EN60238 clause 18 and figure 4, and IEC60238-2011 clause 18, it’s used to test the lamp holder when normal use shall cause no excessive wear or... Voir plus
➤ Visiter Site Internet
Le contact vont mesure aucune vont la mesure E40 7006 - 52 7006 - 53 pour le chapeau de lampe
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go gauge no go gauge, cap torque tester
Contact Gauge and Protection Gauge for Lampcap E40 7006 - 52 7006 - 53 Gauge for finished lamps fitted with E40 caps for testing contact making (7006-52-1) Purpose: To check lamp dimensions for contact making in I.E.C. Holders. Testing: The shape of the lamp with regard to the fit in the lampholder ... Voir plus
➤ Visiter Site Internet
Le chapeau noir vont mesure et aucun disparaissent la mesure H.S. Code 9017300000 pendant 12 mois de garantie
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60061-3 E39 Lamp Cap Go Not Go Gauges 7006 -24B Protection Gauge 7006-24A The E39 gauges are designed according to IEC60061-3:2004, third-lab certification authorized by CNAS on request. ● 7006-24B-1: "Go" gauge for caps on finished lamps ● 7006-24C-1: "Not Go" gauge for caps ... Voir plus
➤ Visiter Site Internet
Nouvel état de la lampe IEC60061-3 de chapeau de filet de vis de la mesure E27 de mesure en acier de go/no-go
Prix: USD230-USD800/piece
MOQ: 1 piece
Heure de livraison: 15 working days
Marque: PEGO
Souligner:go no go gauge, cap torque tester
IEC60061-3 Steel Lamp Cap Screw Thread Gauge E27 Go and No Go Gauge 1. Introduction of Screw Thread Gauge: Lamp cap and Lampholder Gauges are designed according to IEC60061-3, it is also be called to go / no go gauge. The structure and sharp (like thread waveform) of gauges for lamp cap and lamphold... Voir plus
➤ Visiter Site Internet
Le chapeau de lampe disparaissent et ne pas aller la mesure E40 E39 E12 GX53 IEC60061-3 avec des certificats de calibrage
Prix: USD300~USD500
MOQ: 1 set
Heure de livraison: 30 working days
Marque: PEGO GROUP
Souligner:go no go gauge, cap torque tester
IEC60061-3 Lamp Cap Go and Not Go Gauges E40, E39, E12, GX53 with Calibration Certificates 1. Introduction Lamp Cap Go Not Go Gauges are designed according to IEC 60061-3, which specifies the form, dimensions, purpose of use and inspection of gauges for the interchangeability of the relevant lamp ca... Voir plus
➤ Visiter Site Internet